Designed to be installed into any lift with ease and comes pre-packed full of functions so all you have to do is plug it in and they are ready to use.
A vandal resistant stainless steel button face, with in-built beeps, dual illumination and raised braille for the vision impaired.
- ILLUMINATED LEGEND & BRAILLE
- 50MM MOUNTING STUD POSITIONING
- TRUE DUAL WHITE & BLUE LED ILLUMINATED CONTROL CIRCUIT
- BUILT IN BEEPS FOR VISION IMPAIRED
- LOOP TO LOOP CONNECTING WIRES
- TRUE DUAL AMBER & GREEN ILLUMINATED PHONE BUTTON
- MOLEX CONNECTORS FOR PLUG & PLAY
- RAISED RIM FOR VISION IMPAIRED
- DUAL CONTACT WITH INDEPENDENT N/C & N/O SECTORS
Designed and Manufactured in Australia to meet the highest standards in materials available from world class manufactures and suppliers.
A vandal resistant stainless steel button face, with in-built beeps and raised Braille for the visually impaired.
Dual illumination with contrasting colours that switch the standby LED off when the button command has acknowledged the controller.
| OPERATION | DETAILS |
| Button Voltage | 24V DC |
| LED Current | 15mAmps Maximum |
| Button Face |
Vandal Resistant Stainless Steel |
| Case |
UL-94V Rated Polycarbonate Case |
| Contacts |
Dual Contacts with N/O & N/C Selectable |
| Contacts Rating |
125V-AC 3Amps, 30V-DC 2Amps |
| Contact Resistance |
30mOhm |
| Durability |
1,000,000 Presses Minimum |
| Operating Temperatures |
-25°C – 85°C |
| Humidity | Ambient Humidity 60% Maximum |
| Legend |
Illuminated Arial Font With 15mm Character Height |
| Button Diameter |
31mm |
| Mounting Stud Positioning | 50mm |
| Depth | 18mm Compact Design |
When ordering 8R Push Buttons you may also need to purchase a CABLE INTERFACED CIRCUIT BOARD and a 4 WAY CABLE LOOM.
The ‘Cable Interfaced Circuit Board’ powers and transmits data to each of your buttons and the ‘4 Way Cable Loom’ carries that
power and data.
1 X CABLE INTERFACED CIRCUIT BOARD POWERS 12 BUTTONS. If you have in excess of 12 buttons you will need to purchase an additional Circuit Board.
1 X 4 WAY CABLE LOOM REQUIRED FOR EACH BUTTON. They are sold as a single item or in packs of 12.
| PRODUCT | MODEL / DETAILS / ID | |
 |
UP ARROW (ID = UP) Push Button Up Arrow |
|
 |
DOWN ARROW (ID = DN) Push Button Down Arrow |
|
 |
TELEPHONE (ID = PH) Push Button Phone |
|
 |
LOWER GROUND (ID = LG) Push Button Lower Ground |
|
 |
BASEMENT (ID = B) Push Button Lower Ground |
|
 |
DOORS OPEN (ID = DO) Push Button Doors Open |
|
 |
DOORS CLOSED (ID = DC) Push Button Doors Close |
|
 |
GROUND FLOOR (ID = G) Push Button Ground Floor |
|
 |
MEZZANINE (ID = M) Push Button Mezzanine |
|
 |
DISABILITY (ID = D) Push Button Floors (Up to 24 |
|
 |
FLOORS 1- 24 (ID = NUMBER, 1 IS 1) Push Button Floors (Up to 24) |
|
 |
CABLE INTERFACED CIRCUIT BOARD A (ID = PB-1B12) Single Wire Interface Board |
|
 |
CABLE INTERFACED CIRCUIT BOARD B (ID = PB-2B12) Dual Wire Interface Board |
|
 |
4 WAY CABLE LOOM (X 1 ID = PB-CB1, X12 = PB-CB12) 4 Way Cable Loom, Single Or Packs Of 12 |
|
| |
||
The FX-A range of LED hall lantern arrow modules are well suited for new lift installations or upgrading existing buildings.
- HIGH QUALITY BRIGHT LEDS
- ENERGY EFFICIENT & LONG LIFE
- AVAILABLE IN VARIOUS COLOURS
- POLARITY PROTECTED CIRCUIT (FX-A)
- POLY CARBONATE MOULD (FX-A)
- CUSTOM MOUNTING (EID)
- UNIQUE CUSTOM DESIGN (EID)
- CUSTOM LETTERS/NUMBERS (EID)
- IN-BUILT GONG OPTION (EID)
FX-A
The FX-A range of LED hall lantern arrow modules are well suited to new lift installations or to lift modernization projects.
The LEDs employed have a life of more than 100,000 hours so in addition to providing ongoing energy savings they will significantly reduce the incidence of lighting failures and thus also reduce maintenance costs.
The FX-A hall lantern arrow module is supplied ready to install in a project’s custom landing fixture or can also be supplied assembled into an attractive horizontal or vertical, intermediate or terminal low profile surface mount fixture (see our FX range of landing fixtures). The hall lantern module is available in four different LED colours.
FX-EID
The Elevator Identify Display (EID) is an ideal product for destination control lift systems. It provides a highly visible illuminated legend to show the lift car identification. This device is easy to wire and connect to any existing installation and comes in a range of colours. The device can be equipped with an arrival gong.
FX-A
| OPERATION | DETAILS |
| Supply Voltage |
18V – 30 DC |
| Operating Current (LED) |
50mA @ 24V DC |
| Dimensions |
88 (L) X 75 (W) X 30 (H) |
FX-EID
| OPERATION | DETAILS |
| Supply Voltage |
15V – 30 DC |
| Operating Current (LED) |
180mA |
| Operating Current (AD-2) |
250mA |
| Operating Temperature |
0°C to 50°C |
| Humidity |
Up To 90% Non Condensing |
| Dimensions |
255 (L) X 75 (W) X 211 (H) |
| PRODUCT | MODEL / DETAILS / ID | |
 |
FX-A/WW White LED Arrow Fixture |
|
|
FX-A//WB Blue LED Arrow Fixture |
|
 |
FX-EID LED Elevator Identify Display |
|
Illuminate equipment with an intense and compact lighting source using an array of extremely reliable and energy efficient LEDs.
- HIGH QUALITY BRIGHT LEDS
- ENERGY EFFICIENT & LONG LIFE
- POLARITY PROTECTED CIRCUIT
- VARIOUS COLOURS AVAILABLE (FX-4)
- VARIOUS MOUNTING OPTIONS (FX-6)
- POLYCARBONATE ENCLOSURE (FX-4)
The FX-4L Led Module provides the means to illuminate equipment with an intense and compact lighting source using an array of extremely reliable and energy efficient LEDs. The module has a number of mounting options – with and without the robust polycarbonate enclosure – so is just as well suited to new equipment installations as to on-site retrofitting or modernization.
The LEDs employed have a life of more than 100,000 hours so in addition to providing ongoing energy savings they will significantly reduce the incidence of lighting failures and thus also reduce maintenance costs.
The FX-4L LED Module is an ideal replacement for traditional incandescent globes in lift hall lanterns as it delivers significantly superior illumination –standing out against general landing lighting, even at a wide viewing angle.
The FX-4L LED Module is available in cool white (FX-4L/W), red (FX-4L/R), blue (FX-4L/B) and green (FX-4L/G) and thus provides an opportunity to “make a statement” by introducing a splash of vibrant colour to a wide range of applications.
The FX-6L range of LED modules are ideal for lift modernization projects, enabling existing hall lanterns to be retained through simple and cost effective replacement of inefficient incandescent globes with highly efficient LED modules.
The LEDs are particularly bright (cool white : 6500 K) and thus will significantly improve the visibility of older style acrylic or etched glass hall lanterns which may have discoloured through years of service.
With a LED life of more than 100,000 hours, in addition to providing ongoing energy savings, the modules will significantly reduce the incidence of lighting failures and thus also reduce maintenance costs. Can be mounted in back box using studs, screws or double sided adhesive tape.
The FX-6L/W Strip Module is suited to large square or elongated back-lit lanterns, or edge-lit “blade” style lanterns. The interlocking tabs allow modules to be joined side by side for very large square or rectangular lanterns or end to end for very tall edge-lit “blade” style lanterns.
The FX-6L/CW Circular Module is suited to regular square, round or triangle shaped back-lit lanterns. Of course both modules can be used in applications other than in hall lanterns.
| OPERATION | DETAILS |
| Supply Voltage | 12V-30V DC – 16V – 30V AC |
| Operating Current |
170mA @ 24 DC (Colour Dependent) |
| Dimensions | 71mm (L) x 48mm (W) x 18mm (H) |
| OPERATION | DETAILS |
| Supply Voltage | 18V-24V DC |
| Operating Current |
90mA @ 24 DC |
| Dimensions | FX-6L/W: 72(L) x 12(W) FX-6L/CW: 35 (Diameter) |
| PRODUCT | MODEL / DETAILS | |
 |
FX-4L/W LED Lighting – Cool White |
|
 |
FX-4L/B LED Lighting – Blue |
|
 |
FX-4L/R LED Lighting – Red (Made To Order) |
|
 |
FX-6L/W LED Strip Module Lighting – Cool White |
|
 |
FX-6L/CW LED Circular Module Lighting – Cool White |
|
Like What You See?