Our range of lift measuring devices make it simple to determine the weight and counterweight of the lift car along with a detailed diagnosis of performance and ride quality of lifts.
The MSM12 Mobile WeightWatcher determines the weight and counterweight of the lift car. It has a time saving rope tension setting and stores up to 100 measurements of documentation.
- DETERMINE LIFT CAR WEIGHT
- DETERMINE LIFT CAR COUNTERWEIGHT
- TIME SAVING ROPE TENSION SETTING
- STORE UP TO 100 MEASUREMENTS
- ILLUMINATED TOUCH DISPLAY
- USB INTERFACE
The Henning Mobile WeightWatcher rope tension measuring system embodies a patented measuring principle. An individual load sensor is mounted at each rope.
The system can be used with different rope types and diameters. The patented measuring principle allows not only the measurement of each rope tension, it also enables you to set the optimum rope tension very quickly and easily (integrated software-wizard).
| OPERATION | DETAILS |
| Power Supply Voltage |
4 Round Cells. LR6 AA |
| Number of Measuring Channels |
12 |
| Bandwidth |
30 Hz |
| Sampling Frequency |
100 Hz |
| Dimensions |
190 (L) x 138 (W) x 46 (H) |
| Interface |
USB 1.1 |
| PRODUCT | MODEL / DETAILS | |
 |
MSM12 Device Henning Rope Load Measurement Device |
|
 |
MSM12 Kit Henning MSM12 Kit |
|
The AE12 Overload Measuring System embodies a new measuring principle: At each rope, an individual load sensor is mounted which no longer has to be calibrated at the lift using weights.
- NO WEIGHTS NECESSARY CALIBRATION
- SUITABLE VARIOUS ROPE DIAMETERS & TYPES
- 4 PROGRAMMABLE ALARM RELAYS
- UP TO 12 ROPE SENSORS PER EVALUATION UNIT
- EQUALIZES ROPE TENSION
- MONITORING OF ROPE TENSION & SLACK ROPE ALARM
The Henning Overload Measuring System embodies a new measuring principle: At each rope, an individual load sensor is mounted which no longer has to be calibrated at the lift using weights.
The measurement signals are sampled in a controller unit, permitting a check of both the cab weight and even rope tension.
| OPERATION | DETAILS |
| Power Supply Voltage |
12V – 28V DC |
| Power Consumption |
4W |
| Fuse |
1A |
| Sampling Frequency |
100 Hz |
| Hold Input |
12V – 230V AC/DC |
| Number Of Measuring Channels |
12 |
| PRODUCT | MODEL / DETAILS | |
 |
AE12 Henning Overload Control |
|
 |
LSM1 Henning Sensor For Rope 6mm – 16mm |
|
 |
LSM2 Henning Sensor For Rope 5mm – 10mm |
|
 |
AE12 Kit Henning AE12 Overload Control Kit |
|
LIGHTwatcher is installed directly onto the car roof, and will help you save energy costs and even benefit the environment, by helping to reduce your carbon footprint.
- EVENT CONTROLLED CABIN LIGHT, SWITCHES OFF AT STANDSTILL
- NO COMMUNICATION WITH THE LIFT CONTROL NEEDED
- QUICK AND EASY INSTALLATION ONTO THE CAR ROOF
LIGHTwatcher will help you save energy costs and even benefit the environment, by helping to reduce your carbon footprint.
LIGHTwatcher is installed directly onto the car roof, where it can sense car movements by its three acceleration sensors. These sensors even recognize movements of the car door.
The cabin light is switched on each time a movement in the car is detected. The switching threshold for the detection of movements can be adjusted directly at the LIGHTwatcher.
After the lapse of an adjustable time the light is switched off again, if no further car or door movements are detected.
| OPERATION | DETAILS |
| Power Supply Voltage | 230V AC |
| Power Consumption |
2 VA |
| Relays |
3 |
| Max Switching Voltage |
250 V AC |
| Max Peak Current |
15 A |
| Max Rated Current |
10 A |
| Max Rated Load (Resistive) |
2500 VA |
| Max Rated Load (Ind.) |
500 VA |
| Min Switching Load | 0,3 W |
| Control Voltage | 12V – 230V AC/DC |
| PRODUCT | MODEL / DETAILS | |
 |
LIGHTwatcher
Henning Lift Light Energy Saver |
|
The LiftPC Mobile Diagnosis sets down the standards to be applied in measuring elevators travel performance and ride quality.
- WORLDWIDE ACCEPTED
- ISO 18738 RIDE QUALITY EVALUATION
- DATABASE MODULE TO GOVERN DATA
- CHINEASE GB/T 10058 – 1997 QUALITY EVALUATION
- COMPARISON OF ELEVATORS
- VIBRATION & SOUND MEASUREMENT
LiftPC Mobile Diagnosis is a powerful measuring system of modular structure for mobile and flexible measurement of performance and ride quality of lifts.
Precise measurements instead of subjective feelings are the beginning of correct diagnostic procedures. The new ISO 18738 sets down the standards to be applied in measuring elevator travel performance and ride quality.
LiftPC makes it possible to measure and compare quality.
| OPERATION | DETAILS |
| Dimensions |
60mm (L) x 60mm (W) x 60mm (H) |
| Weight |
300g |
| Fixation | Thread M6x15 In Bottom Or Clamp Fastening |
| Ports
|
1x USB 1.1 For Connection To Notebook/Desktop 1x RJ12 For Connection To Bluetooth Module BM 1 (Art.-Nr.: 450 060) or Hand Terminal HT 1 (Art.-Nr.: 450 250) |
| Measurement Range X,Y | ±1,7 g |
| Measurement range Z | -0,7 g /+2,7 g |
| Bandwidth X, Y, Z | 400 Hz |
| Resolution X, Y, Z | 64 µg |
| Protection Class | IP20 |
| PRODUCT | MODEL / DETAILS | |
 |
LiftPC
Henning LiftPC Performance Monitoring |
|